From the blog
How to Enable or Disable Juniper Interface
In this article, we will discuss the basic configuration of Juniper routers and switches. This article will help network professionals who are working on cisco systems and wants to learn Juniper systems. Below, you will found commands which…
Read More »What is Network Address Translation | Different types of NAT
In this article, we will discuss the NAT (Network Address Translation). Before continuing, I recommend you to read my Public and Private IP address article. NAT is also known as IP masquerading. Let’s continue! Why we need NAT? NAT…
Read More »SNAT vs DNAT | Source NAT vs Destination NAT
In this article, we will discuss SNAT (Source NAT) and DNAT (Destination NAT). Both terminologies are related to NAT (Network Address Translation). Before continue, I recommend, please take a look at Network Address Translation. Source NAT (SNAT) SNAT…
Read More »OSPF | Open Shortest Path First | Quick Overview
In this article, we will discuss Open Shortest Path First (OSPF). It is an open standard routing protocol which is defined as RFC 2328 for IPv4 and RFC 5340 for IPv6. There is a total of 5 packets(messages)…
Read More »EIGRP: The complete guide for Beginners and Experts
In this article, we will discuss EIGRP (Enhanced Interior Gateway Routing Protocol), which is a hybrid routing protocol. It was originally defined by Cisco and available on only Cisco devices. Since 2013, it’s now an Open Standard and…
Read More »EIGRP Packet Types / Messages Types and Neighborship Parameters
Enhanced Interior Gateway Routing Protocol (EIGRP) is one of the famous routing protocols. It is widely used in networking. In this article, we will discuss types of messages/ packets which is used in the EIGRP Protocol. We will…
Read More »